• Tile Floor Cleaning
  • Tile and Grout Cleaning

Useful Grout Cleaning Tips

If you have tiles in your house, then you know the trouble that comes with it. It can be hectic and tough to clean the floors, especially the grouts. Homeowners are always on the lookout for the tips to achieve the Best Grout Cleaning possible. You have come to the right place. 

Here are some useful tips that you could utilize to properly and efficiently clean the grouts in your home. 

The Old Baking Soda and Vinegar Mix

You have probably encountered this solution a lot of times in your online search for cleaning hacks. This is one of the most popular ways to clean the annoying stains that just won’t go away. They are perfect to clean the grouts because they can easily remove any spot on it and make your floor look clean and shiny. 

Method: You need to create a paste using three parts baking soda and one part water. So, when you have the paste ready, just apply that onto the grout lines with your fingers while wearing rubber gloves. Then you have to add in vinegar and water in a spray bottle, using equal proportions, and spray that into where you applied the previous solution of baking soda. If you notice any bubbling occurring, that means the cleaning is taking place! After the bubbling has stopped, use a brush to clean the grouts. You can use a toothbrush for this purpose. The last step is to mop the floor using simple water. 

Remember that you cannot use this baking soda solution if you’re dealing with marble or limestone tiles! With natural stone, you cannot use the vinegar solution. 

Oxygenated Bleach Process 

This another reliable process of successfully cleaning the grouts in your home as well. You won’t need to hire a professional for this one either. Use this simple way whenever your grouts appear too dirty. Though, do be careful when carrying it out! 

Method: You have to take warm water in two cups. Then you have to dissolve two tablespoons into those cups. You have to mix the solutions a lot so that your bleach is completely activated. Before applying it to the whole floor, you have to test it out on a corner first. This is just to ensure that the color isn’t damaged by this solution. Once you’re sure there would be no damage, you can add in this solution to all the grout lines. Go section by section and be very careful throughout the process. It’s best if you use a nylon bristle brush to scrub in between the grout lines. Do the scrubbing a few minutes after the solution of oxygenated bleach 

It’s not preferred for tiles that are colored as it can damage the color. 

Professional Help 

Here were the two most effective solutions to your grout cleaning worries. If you are dealing with tough tiles such as marble ones, you can always ask for professional help. Look for Marble Polishing Contractors that are affordable. Be sure to see that you can trust the contractors.  

 

Leave a comment